Industrial Iot Modbus Gateway with Rs485 and 32 Registers
System Feature
- Cortex M3 32-bit ARM
- Double watchdog to ensure stability
- With signal filtering mechanisms
- Network-reconnect and retransmission to ensure data accurately transmit
- Update RTC automatically or manually, clock source support Sms, NTP, CwtIO Server
- Configurable action schedule(second, minute, day, week, month)
- Support Interlock programming, Event trigger
- Provide console utility for visual programming over 100 parameters
- Optional inside lithium battery for power lost alarm and keep 8-20 hours working
DI feature
- Monitor dry contact(NO or NC)
DO(T) feature
- Transistor output(drive voltage=power supply voltage, Drive current≤500mA)
- on/off/pulse DO by remote control or local event
- Remember status when power lost
DO(K) feature
- Relay NO contact output(load: 2A / 125VAC,220VDC)
- on/off/pulse DO by remote control or local event
- Status memory function for power lost
AI feature
- Accept 4-20mA (option: 0-5V), Sampling frequency: 33Hz, 10-bit precision)
- Convert signal to actual measure value,support adjustment
- Can set parameters for value processing, alarm, data transmission
- Sensor disconnect alarm
SMS feature
- Support 10 cell phone numbers for alarm and control
- Send sms alarm when input is triggered or reach alarm level
- Editable alarm and recover sms with time stamp
- Remote get device status or value by sending sms command
- Control output via sms command
- Configurable schedule for sms report IO channel's status or value
- Remote update parameters by sms
- Forward simcard overdue sms to admin
- Support power lost sms alarm and recover sms(works with inside battery)
Wireless network communication
- Option network: cellular(2g/3g/4g) or Wi-Fi
- Support TCP/IP two-way communication with Max.4 servers(IP or domain)
- Support post or respond mode for data communication
- Communication protocol: Modbus TCP,http post, Cwt_IO(two-way communication)
- Support two-way data transparent transmission with RS485 or RS232
Modbus feature
- Can be modbus master read/write salve over RS485
- As a RS485 I O module to be polled by modbus master
- Support Modbus RTU to TCP convert over Ethernet or GPRS/3G
