CWT5005A Professional DIY IOT Gateway Device for Industrial Application
CWT5005A RTU with 2 DI, 2 DO, RS232 standard electrical interface can connect various industrial equipment, such as PLC, meters, sensors, electrical switches.
System Feature
- Industrial NXP 32-bit ARM MCU
- Reliable performance with built-in double watchdog, 24×7 operation
- With signal filtering mechanisms
- Stable reconnection strategy for data transmit
- Synchronize clock with multiple way, Sms, NTP, CwtIO Server
- Configurable action schedule(second, minute, day, week, month)
- Can automatically execute tasks according to preset Events
- Provide configure software, visual programming, over 100 parameters can be set
- Optional exterior rechargable battery for 8-20 hours working when power lost
DI feature
- Monitor dry contact(NO or NC)
DO(T) feature
- Relay drivable output(drive voltage=power supply voltage, Drive current≤500mA)
- on/off/pulse DO by remote control or local event
- Remain down status when power lost
DO(K) feature
- Relay NO contact output(load: 2A / 125VAC,220VDC)
- Remote or local event activate DO on/off/pulse
- Status memory function for power lost
SMS feature
- Can add 10 administrator numbers for alarm and remote control
- Sms alarm when any IO channel triggered or out of preset normal range
- Customizable sms messages, like alarm, receove, report
- Remote get device status or value by sending sms command
- Activate output by sending sms
- Sms report any IO channel’s status or value on schedule
- Remote update parameters by sms
- Sms remind for sim card overdue
- Sms alar for power lost and recover
- Wireless network communication
- Optianal onboard GPRS, 3g, 4g, Wi-Fi module
- Communicate with up to 4 servers(IP or domain) by TCP/IP
- Support post or respond mode for data communication
- Communication protocol: Modbus TCP,http post, Cwt_IO(two-way communication)
- Can forward data between wireless network with RS485 or RS232
