Industrial Gsm Gprs 3g Wifi Iot Gateway Internet Of Things Device Management
System Feature
- Adopted highly integrated industrial 32-bit ARM MCU
- Double watchdog to ensure stability
- With signal filtering mechanisms
- Stable reconnection strategy for data transmit
- Automatically or manually update interior clock by sms or NTP or server
- Can set multiple timers(second, minute, day, week, month) to execute actions, e.g. output, upload data, change setting
- Event-based linkage programming, e.g. alarm linkage output
- Easy used GUI configure software for setting up to 100 parameters
- Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power lost
DI feature
- Monitor dry contact(NO or NC)
DO(T) feature
- Transistor output(drive voltage=power supply voltage, Drive current≤500mA)
- on/off/pulse DO by remote control or local event
- Status memory function for power lost
DO(K) feature
- Relay NO contact output(load: 2A / 125VAC,220VDC)
- on/off/pulse DO by remote control or local event
- Status memory function for power lost
AI feature
- 4-20mA (option: 0-5V) in, Sampling frequency: 33Hz, 10-bit precision)
- Transduce 4-20mA(0-5V) to actual value
- Can set parameters for value processing, alarm, data transmission
- Sensor disconnect alarm
SMS feature
- Can add 10 administrator numbers for alarm and remote control
- Sms alarm when any IO channel triggered or out of preset normal range
- Editable alarm and recover sms with time stamp
- Query any IO channel’s status or value via sms command
- Activate output by sending sms
- Sms report any IO channel’s status or value on schedule
- Remote setting via sms commands
- Sms remind for sim card overdue
- Sms alar for power lost and recover
Wireless network communication
- Option network: cellular(2g/3g/4g) or Wi-Fi
- Communicate with up to 4 servers(IP or domain) by TCP/IP
- Support post or respond mode for data communication
- Communicate with server by optional Cwt_IO, Modbus TCP, http post protocol
- Transfer RS485 or RS232 Data to wireless network
Modbus feature
- Can be modbus master read/write salve over RS485
- Can work as a modbus slave to be read/write by master(HMI, SCADA etc.)
- Support Modbus RTU to TCP convert over Ethernet or GPRS/3G
