gsm sms alarm unit, sms alarm and remote controller
System Feature
- Industrial NXP 32-bit ARM MCU
- Double watchdog to ensure stability
- Support signal fileter
- Stable reconnection strategy for data transmit
- Synchronize clock with multiple way, Sms, NTP, CwtIO Server
- Automatically execute preset task by schedule(second, minute, day, week, month)
- Support Interlock programming, Event trigger
- Provide configure software, visual programming, over 100 parameters can be set
- Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power lost
DI feature
- Monitor dry contact(NO or NC)
DO(T) feature
- Transistor output(drive voltage=power supply voltage, Drive current≤500mA)
- on/off/pulse DO by remote control or local event
- Remember status when power lost
DO(K) feature
- Relay NO contact output(load: 2A / 125VAC,220VDC)
- Remote or local event activate DO on/off/pulse
- Remember status when power lost
AI feature
- Standard 4-20mA (option: 0-5V) signal in, Sampling frequency: 33Hz, 10-bit precision)
- Convert signal to actual measure value,support adjustment
- Support offset and gain, alarm parameters, upload data setting
- Sensor disconnect alarm
SMS feature
- Preset 10 phone numbers (support distribute authority to receive sms)
- Send sms alarm when input is triggered or reach alarm level
- All alarm and recover sms text can be edited
- Remote get device status or value by sending sms command
- On/off/pulse output by sending sms
- Can set interval to report IO channel's status or value by sms
- Remote setting via sms commands
- Forward simcard overdue sms to admin
- Sms alar for power lost and recover
Wireless network communication
- Option network: cellular(2g/3g/4g) or Wi-Fi
- Support TCP/IP two-way communication with Max.4 servers(IP or domain)
- Events(e.g. alarm, timer) trigger upload data
- Support http post, Modbus TCP, CWT protocol over cellular or Wi-Fi
- Transfer RS485 or RS232 Data to wireless network
